Florafelt WIFI Moisture Sensor

$69.00

Insert into Florafelt Pockets and Pro System to track moisture levels in your living walls. Monitors living wall pocket moisture and provides alerts for potential dry-outs.

Florafelt Govee Humidity Sensor protective sleeve.

Track Moisture Trends Over Time

Observe humidity readings over weeks or months, and make adjustments to your irrigation as required.

Florafelt Govee Humidity Sensor protective sleeve.

Set Low Humidity Alerts

Adjust the Relative Humidity Alarm to alert you of potential dryouts.

Click on Alert Me to make it active.

Start with a 50% setting. If you get false alerts then lower the level by 10% to find a more accurate setting. Raise the level if you find your wall has a higher humidity on average.

Tip: First observe the humidity settings for a week, then adjust the level below the lowest daily level.

Florafelt Govee Humidity Sensor protective sleeve.

Protect the Unit from Water Exposure

The electronic unit itself is not waterproof. Use the provided plastic cover to protect the unit from exposure to water.

Florafelt Govee Moisture Sensor placed in the top row pocket for early dry out detection.

Place the Sensor Unit in the Top Row Pocket for Early Dry Out Detection

The moisture sensor will provide the best results if placed in the very top row of you living wall. This will give you the earliest possible notification in case of an irrigation system or pump failure.

To more easily insert the unit you may need to first remove the top plant, then place the unit in the pocket. Then replace the plant so they share the pocket together.

Installation and Setup

Florafelt Govee Moisture Sensor Setup Guide

Weight2 lbs
Dimensions5 × 3 × 3 in
© 2021 Plants On Walls, all rights reserved
Florafelt Living Wall Systems, U.S. Patent 8141294