How To Mount Florafelt Pocket Panels Using Deck Screws

To mount Florafelt Pocket panels to a waterproofed plywood surface, use smooth polymer coated deck screws. Make sure to pull the top flap forward so it is positioned in front of the panel above to allow for proper water flow. Before installation, ensure that the panels are evenly spaced and level by pre-marking the wall. To ensure a watertight seal, use EPDM rubber pond liner for waterproofing.

1. Pull the top flap outward

2. Be sure the top flap is in front of the panel above

3. Attach with smooth coated deck screws

4. Locate deck screws at the corner pockets upper edge

Recommended Fastener

Grip-Rite – 8x 1-5/8 in. Philips Bugle-Head Coarse Thread Sharp Point Polymer Coated Exterior Screw – Home Depot