How to Connect Drain Tray Parts
- Position the drain tray parts to be connected end to end and face downward on a level surface.
- Clean each outside edge with alcohol.
- Use an 8-inch piece of Water Seal Tape to connect the ends.
- Remove clear plastic backing on tape to reveal the adhesive surface.
- Align marks on tape and tray and center at the seam.
- Wrap the tape around the surface, smoothing out any wrinkles or bubbles.
- Wrap tape over the edges and into the tray for each side.
- Rub the tape firmly to ensure a tight clean fit.
- Carefully lift the tray to prevent stress on the joint.
- Place on tray brackets.